A list of questions from a new user / Quelques questions d’un nouvel utilisateur

[ClementA]

Bonjour !

J’ai récemment installé iode-5.10-20250219-arm64_ab.img sur mon vieux Blackview BV 4900 Pro (BV4900ProUS0007640, arm64 / MT6762V) et ai été très impressionné par la facilité d’installation, d’usage, et la qualité générale de iodé. Donc, déjà : merci & bravo !

J’ai une petite liste de questions.

• Dois-je faire un post par question ?
• Est-il préférable de poster en Français ou en Anglais sur ce forum (l’Allemand n’étant malheureusement pas une option pour moi) ?
• Lorsque la version 6 de iodéoS sera disponible pour le GSI, aurais-je à formater mes données et à repasser par la ligne de commande, ou sera-t-il possible de faire la mise à jour depuis l’updater de iodéOS directement et de conserver mes données ?
• J’ai un Pixel 5 (redfin) qui tourne actuellement sous LineageOS 22.1. J’ai lu ces posts (Migrate from previous rom , Switch from LineageOS to Iode without data loss? et Switching from LineageOS to iodéOS on an S5e - do I need to re-flash stock first? ), est-ce toujours le cas qu’une migration nécessite la perte de données, ou tenter via Seedvault est viable?
• J’ai une tablette Samsung Galaxy Tab S5 (SM-T725) qui tourne actuellement sous LineageOS 22.1 et deux S6 Lite (une, SM-P613 utilisant le système de Samsung, une SM-P610 qui tourne sous LineageOS 22.1). Si je lis bien ce post, seule la gts4lv (SM-T725) est officiellement supportée par iodéOS, et étant donné que la SM-P610 tourne sous LineageOS, j’ai bon espoir que iodéOS sera bien supporté. Cependant, qu’en est-il de SM-P613, pour laquelle LineageOS ne semble pas supporté ?

Merci infiniment!

[rik]

I ran your post through Firefox translate, please forgive my sad state of being a (mostly) monolingual English speaker (besides some Amharic and Arabic). Yes lots of translation issues for Firefox but it can help get some understanding I hope.

@ClementA

Good morning.

I recently installed odio-5.10-20250219-arm64-ab.img on my old Blackview BV 4900 Pro (BV4900ProUS0007640, arm64 / MT6762V) and were very impressed with the ease of installation, use, and the overall quality of iodized. So, already: thank you, well done.

I have a small list of questions.

• Do I have to do one post per question?

Yes that is best if possible. Then we can know if a thread can be marked “solved”.

• Is it better to post in French or English on this forum (unfortunately not being an option for me)?

As noted, I used a translation tool. I see several posting questions in French or German with an English translation below. I don’t know how possible this would be for you. It would increase the chances for a reply if possible.

• When version 6 of iodeoS is available for the GSI, would I have to format my data and return via the command line, or will it be possible to update since the updateriodized update directly and keep my data?

Sorry I am not certain, but the GSI Wiki thread is probably where to look for more info.

• I have a Pixel 5 (redfin) that is currently running on LineageOS 22.1. I read these posts (Migrate from previous rom , Switch from LineageOS to Iode without data loss? and Switching from LineageOS to iodéOS on an S5e - do I need to re-flash stock first? ), is it still the case that a migration requires data loss, or is it viaviable?

Personally, I think if the base android version matches it should be fine, and I don’t think (??) it will require a userdata wipe, but do have a backup first, and be ready to do a full reset and install if you experience issues.

• I have a Samsung Galaxy Tab S5 (SM-T725) tablet currently running on LineageOS 22.1 and two S6 Lite (one, SM-P613 using Samsung’s system, a SM-P610 running on LineageOS 22.1). If I read this post carefully, only the gts4lv (SM-T725) is officially supported by idéOS, and since the SM-P610 runs on LineageOS, I am confident that iodOS will be well supported. However, what about SM-P613, for which LineageOS does not seem to bear?

Sorry I have not read the GSI thread very closely at all. But if you can crawl around the internet and find an unofficial Lineage build with sources then it may be possible to make an unofficial iodéOS build, but no guarantees.

Good luck!

[ClementA]

Thanks a lot, you’ve answered all of my questions, and some more