Google Pixel 8 Pro Bootloop

[seb]

Thank you very much Chris!
Unfortunately I always get the same result

Here is the log :

Résumé

./flash-all.sh
Warning: metadata type is raw, but ext4 was requested for formatting.
mke2fs 1.46.6 (1-Feb-2023)
Creating filesystem with 16384 4k blocks and 16384 inodes

Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done

Sending ‘metadata’ (76 KB) OKAY [ 0.002s]
Writing ‘metadata’ OKAY [ 0.005s]
Finished. Total time: 0.028s
Erasing ‘metadata’ OKAY [ 0.005s]
Finished. Total time: 0.006s
Warning: userdata type is raw, but f2fs was requested for formatting.

F2FS-tools: mkfs.f2fs Ver: 1.16.0 (2023-04-11)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Enable Project quota
Info: not exist /proc/version!
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 479891624 (234322 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
Info: add quota type = 2 => 6
Info: format version with
“6.5.0-26-generic”
[f2fs_init_sit_area: 640] Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 674] Filling nat area at offset 0x01a00000
[f2fs_write_root_inode:1292] Writing root inode (hot node), 2c000 0 200 at offset 0x00180224
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c601, 0002c602
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180225
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c603, 0002c604
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180226
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c605, 0002c606
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180227
[f2fs_update_nat_root:1479] Writing nat root, at offset 0x00001a00
[f2fs_add_default_dentry_root:1676] Writing default dentry root, at offset 0x0002c600
Info: Overprovision ratio = 0.300%
Info: Overprovision segments = 351 (GC reserved = 340)
[f2fs_write_check_point_pack: 837] Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 993] Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack:1020] Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack:1032] Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack:1043] Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack:1051] Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack:1071] Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack:1092] Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack:1111] Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1144] Writing super block, at offset 0x00000000
Info: format successful
Sending ‘userdata’ (97 KB) OKAY [ 0.003s]
Writing ‘userdata’ OKAY [ 0.144s]
Finished. Total time: 0.457s
Erasing ‘userdata’ OKAY [ 0.118s]
Finished. Total time: 0.119s
Sending ‘modem_a’ (102252 KB) OKAY [ 3.102s]
Writing ‘modem_a’ OKAY [ 0.135s]
Finished. Total time: 3.319s

Bootloader Version…: ripcurrent-14.1-11208047
Baseband Version…: g5300i-230927-231102-B-11040898
Serial Number…: xxx

extracting android-info.txt (0 MB) to RAM…
Checking ‘product’ OKAY [ 0.000s]
Setting current slot to ‘a’ OKAY [ 0.085s]
extracting boot.img (64 MB) to disk… took 0.270s
archive does not contain ‘boot.sig’
Sending ‘boot_a’ (65536 KB) OKAY [ 1.928s]
Writing ‘boot_a’ OKAY [ 0.086s]
extracting init_boot.img (8 MB) to disk… took 0.098s
archive does not contain ‘init_boot.sig’
Sending ‘init_boot_a’ (8192 KB) OKAY [ 0.234s]
Writing ‘init_boot_a’ OKAY [ 0.014s]
extracting dtbo.img (16 MB) to disk… took 0.094s
archive does not contain ‘dtbo.sig’
Sending ‘dtbo_a’ (16384 KB) OKAY [ 0.496s]
Writing ‘dtbo_a’ OKAY [ 0.023s]
archive does not contain ‘dt.img’
extracting pvmfw.img (1 MB) to disk… took 0.016s
archive does not contain ‘pvmfw.sig’
Sending ‘pvmfw_a’ (1024 KB) OKAY [ 0.029s]
Writing ‘pvmfw_a’ OKAY [ 0.006s]
archive does not contain ‘recovery.img’
extracting vbmeta.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta.sig’
Sending ‘vbmeta_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_a’ OKAY [ 0.004s]
extracting vbmeta_system.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_system.sig’
Sending ‘vbmeta_system_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_system_a’ OKAY [ 0.004s]
extracting vbmeta_vendor.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_vendor.sig’
Sending ‘vbmeta_vendor_a’ (4 KB) OKAY [ 0.001s]
Writing ‘vbmeta_vendor_a’ OKAY [ 0.004s]
extracting vendor_boot.img (64 MB) to disk… took 0.232s
archive does not contain ‘vendor_boot.sig’
Sending ‘vendor_boot_a’ (65536 KB) OKAY [ 1.961s]
Writing ‘vendor_boot_a’ OKAY [ 0.093s]
extracting vendor_kernel_boot.img (64 MB) to disk… took 0.165s
archive does not contain ‘vendor_kernel_boot.sig’
Sending ‘vendor_kernel_boot_a’ (65536 KB) OKAY [ 1.928s]
Writing ‘vendor_kernel_boot_a’ OKAY [ 0.087s]
extracting super_empty.img (0 MB) to disk… took 0.000s
extracting product.img (1264 MB) to disk… took 4.654s
[liblp] Partition product_a will resize from 0 bytes to 1325514752 bytes
extracting system.img (826 MB) to disk… took 3.111s
[liblp] Partition system_a will resize from 0 bytes to 867106816 bytes
extracting system_dlkm.img (10 MB) to disk… took 0.026s
[liblp] Partition system_dlkm_a will resize from 0 bytes to 10964992 bytes
extracting system_ext.img (406 MB) to disk… took 1.562s
[liblp] Partition system_ext_a will resize from 0 bytes to 425959424 bytes
extracting system_other.img (15 MB) to disk… took 0.069s
[liblp] Partition system_b will resize from 0 bytes to 16416768 bytes
extracting vendor.img (794 MB) to disk… took 3.260s
[liblp] Partition vendor_a will resize from 0 bytes to 833581056 bytes
extracting vendor_dlkm.img (26 MB) to disk… took 0.090s
[liblp] Partition vendor_dlkm_a will resize from 0 bytes to 27418624 bytes
archive does not contain ‘vendor_other.img’
Sending sparse ‘super’ 1/14 (254972 KB) OKAY [ 7.565s]
Writing ‘super’ OKAY [ 0.359s]
Sending sparse ‘super’ 2/14 (254972 KB) OKAY [ 7.952s]
Writing ‘super’ OKAY [ 0.348s]
Sending sparse ‘super’ 3/14 (254972 KB) OKAY [ 7.499s]
Writing ‘super’ OKAY [ 0.350s]
Sending sparse ‘super’ 4/14 (254972 KB) OKAY [ 7.823s]
Writing ‘super’ OKAY [ 0.350s]
Sending sparse ‘super’ 5/14 (254972 KB) OKAY [ 7.877s]
Writing ‘super’ OKAY [ 0.355s]
Sending sparse ‘super’ 6/14 (254972 KB) OKAY [ 8.021s]
Writing ‘super’ OKAY [ 0.352s]
Sending sparse ‘super’ 7/14 (254972 KB) OKAY [ 7.998s]
Writing ‘super’ OKAY [ 0.350s]
Sending sparse ‘super’ 8/14 (254972 KB) OKAY [ 8.018s]
Writing ‘super’ OKAY [ 0.348s]
Sending sparse ‘super’ 9/14 (254972 KB) OKAY [ 7.996s]
Writing ‘super’ OKAY [ 0.363s]
Sending sparse ‘super’ 10/14 (254972 KB) OKAY [ 8.117s]
Writing ‘super’ OKAY [ 0.349s]
Sending sparse ‘super’ 11/14 (254972 KB) OKAY [ 8.018s]
Writing ‘super’ OKAY [ 0.353s]
Sending sparse ‘super’ 12/14 (254972 KB) OKAY [ 8.016s]
Writing ‘super’ OKAY [ 0.349s]
Sending sparse ‘super’ 13/14 (254972 KB) OKAY [ 8.044s]
Writing ‘super’ OKAY [ 0.349s]
Sending sparse ‘super’ 14/14 (110164 KB) OKAY [ 3.456s]
Writing ‘super’ OKAY [ 0.178s]
archive does not contain ‘boot_other.img’
archive does not contain ‘odm.img’
archive does not contain ‘odm_dlkm.img’
archive does not contain ‘vendor_other.img’
Finished. Total time: 132.433s
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 29.025s
Warning: skip copying abl image avb footer (abl partition size: 0, abl image size: 1785856).
Sending ‘abl’ (1744 KB) OKAY [ 0.057s]
Writing ‘abl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl1 image avb footer (bl1 partition size: 0, bl1 image size: 16384).
Sending ‘bl1’ (16 KB) OKAY [ 0.001s]
Writing ‘bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl2 image avb footer (bl2 partition size: 0, bl2 image size: 536576).
Sending ‘bl2’ (524 KB) OKAY [ 0.018s]
Writing ‘bl2’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl31 image avb footer (bl31 partition size: 0, bl31 image size: 106496).
Sending ‘bl31’ (104 KB) OKAY [ 0.004s]
Writing ‘bl31’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gcf image avb footer (gcf partition size: 0, gcf image size: 8192).
Sending ‘gcf’ (8 KB) OKAY [ 0.001s]
Writing ‘gcf’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa_bl1 image avb footer (gsa_bl1 partition size: 0, gsa_bl1 image size: 32768).
Sending ‘gsa_bl1’ (32 KB) OKAY [ 0.002s]
Writing ‘gsa_bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa image avb footer (gsa partition size: 0, gsa image size: 348160).
Sending ‘gsa’ (340 KB) OKAY [ 0.013s]
Writing ‘gsa’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying ldfw image avb footer (ldfw partition size: 0, ldfw image size: 2392064).
Sending ‘ldfw’ (2336 KB) OKAY [ 0.078s]
Writing ‘ldfw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying pbl image avb footer (pbl partition size: 0, pbl image size: 49152).
Sending ‘pbl’ (48 KB) OKAY [ 0.003s]
Writing ‘pbl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying tzsw image avb footer (tzsw partition size: 0, tzsw image size: 7917568).
Sending ‘tzsw’ (7732 KB) OKAY [ 0.242s]
Writing ‘tzsw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.050s
< waiting for any device >
FAILED (remote: ‘invalid android images, skip locking’)
fastboot: error: Command failed

[chrisrg]

Almost identical log and no evidence of key being flashed. Is that because you did it seperately, before the flash-all? Or did you edit the flash-all but it hasn’t worked? Did you save your changes?

This is bugging me (not as much as you I expect!); it should work.

If you edited script and it hasn’t worked, I suspect some sort of fastboot issue: cable, usb port or fastboot version.

It could also be potential source of issue with the underlying state of the device. When I have had this much trouble with flashing it usually works to flash stock to an earlier state to one slot and then sideload stock ota to the next version up. So in this case I would flash stock December then sideload stock ota to January. But it’s pretty tedious…

[seb]

It turns out that there was a small bug when saving the file.
After restarting my session, the flash-all file that I had modified was taken into account.
So I restarted the flash-all. We can now see that the key has been flashed.
At the end of the installation, I was able to choose to re-lock the bootloader (I don’t know if it’s better to leave it unlocked?).
Anyway, it didn’t change the result
The phone starts on the “android” screen with brightness variations for 60s, freezes then turns off and restarts 20s later.

What’s weird is that the installation of lineage-21.0-20240315 goes very well and works correctly…

Here is the log:

Résumé

./flash-all.sh
Erasing ‘avb_custom_key’ (bootloader) avb custom key: erase done
OKAY [ 0.057s]
Finished. Total time: 0.057s
Warning: skip copying avb_custom_key image avb footer (avb_custom_key partition size: 0, avb_custom_key image size: 1032).
Sending ‘avb_custom_key’ (1 KB) OKAY [ 0.001s]
Writing ‘avb_custom_key’ (bootloader) avb custom key: flash done
OKAY [ 0.033s]
Finished. Total time: 0.036s
Warning: metadata type is raw, but ext4 was requested for formatting.
mke2fs 1.46.6 (1-Feb-2023)
Creating filesystem with 16384 4k blocks and 16384 inodes

Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done

Sending ‘metadata’ (76 KB) OKAY [ 0.002s]
Writing ‘metadata’ OKAY [ 0.005s]
Finished. Total time: 0.030s
Erasing ‘metadata’ OKAY [ 0.005s]
Finished. Total time: 0.006s
Warning: userdata type is raw, but f2fs was requested for formatting.

F2FS-tools: mkfs.f2fs Ver: 1.16.0 (2023-04-11)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Enable Project quota
Info: not exist /proc/version!
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 479891624 (234322 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
Info: add quota type = 2 => 6
Info: format version with
“6.5.0-26-generic”
[f2fs_init_sit_area: 640] Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 674] Filling nat area at offset 0x01a00000
[f2fs_write_root_inode:1292] Writing root inode (hot node), 2c000 0 200 at offset 0x00180224
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c601, 0002c602
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180225
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c603, 0002c604
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180226
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c605, 0002c606
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180227
[f2fs_update_nat_root:1479] Writing nat root, at offset 0x00001a00
[f2fs_add_default_dentry_root:1676] Writing default dentry root, at offset 0x0002c600
Info: Overprovision ratio = 0.300%
Info: Overprovision segments = 351 (GC reserved = 340)
[f2fs_write_check_point_pack: 837] Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 993] Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack:1020] Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack:1032] Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack:1043] Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack:1051] Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack:1071] Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack:1092] Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack:1111] Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1144] Writing super block, at offset 0x00000000
Info: format successful
Sending ‘userdata’ (97 KB) OKAY [ 0.003s]
Writing ‘userdata’ OKAY [ 0.144s]
Finished. Total time: 0.444s
Erasing ‘userdata’ OKAY [ 0.117s]
Finished. Total time: 0.117s
Sending ‘modem_a’ (102252 KB) OKAY [ 2.690s]
Writing ‘modem_a’ OKAY [ 0.165s]
Finished. Total time: 2.969s

Bootloader Version…: ripcurrent-14.1-11208047
Baseband Version…: g5300i-230927-231102-B-11040898
Serial Number…: xxx

extracting android-info.txt (0 MB) to RAM…
Checking ‘product’ OKAY [ 0.000s]
Setting current slot to ‘a’ OKAY [ 0.079s]
extracting boot.img (64 MB) to disk… took 0.249s
archive does not contain ‘boot.sig’
Sending ‘boot_a’ (65536 KB) OKAY [ 1.716s]
Writing ‘boot_a’ OKAY [ 0.118s]
extracting init_boot.img (8 MB) to disk… took 0.024s
archive does not contain ‘init_boot.sig’
Sending ‘init_boot_a’ (8192 KB) OKAY [ 0.201s]
Writing ‘init_boot_a’ OKAY [ 0.020s]
extracting dtbo.img (16 MB) to disk… took 0.046s
archive does not contain ‘dtbo.sig’
Sending ‘dtbo_a’ (16384 KB) OKAY [ 0.418s]
Writing ‘dtbo_a’ OKAY [ 0.023s]
archive does not contain ‘dt.img’
extracting pvmfw.img (1 MB) to disk… took 0.003s
archive does not contain ‘pvmfw.sig’
Sending ‘pvmfw_a’ (1024 KB) OKAY [ 0.032s]
Writing ‘pvmfw_a’ OKAY [ 0.006s]
archive does not contain ‘recovery.img’
extracting vbmeta.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta.sig’
Sending ‘vbmeta_a’ (8 KB) OKAY [ 0.000s]
Writing ‘vbmeta_a’ OKAY [ 0.004s]
extracting vbmeta_system.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_system.sig’
Sending ‘vbmeta_system_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_system_a’ OKAY [ 0.004s]
extracting vbmeta_vendor.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_vendor.sig’
Sending ‘vbmeta_vendor_a’ (4 KB) OKAY [ 0.000s]
Writing ‘vbmeta_vendor_a’ OKAY [ 0.004s]
extracting vendor_boot.img (64 MB) to disk… took 0.200s
archive does not contain ‘vendor_boot.sig’
Sending ‘vendor_boot_a’ (65536 KB) OKAY [ 1.602s]
Writing ‘vendor_boot_a’ OKAY [ 0.118s]
extracting vendor_kernel_boot.img (64 MB) to disk… took 0.184s
archive does not contain ‘vendor_kernel_boot.sig’
Sending ‘vendor_kernel_boot_a’ (65536 KB) OKAY [ 1.666s]
Writing ‘vendor_kernel_boot_a’ OKAY [ 0.124s]
extracting super_empty.img (0 MB) to disk… took 0.000s
extracting product.img (1264 MB) to disk… took 5.584s
[liblp] Partition product_a will resize from 0 bytes to 1325514752 bytes
extracting system.img (826 MB) to disk… took 3.636s
[liblp] Partition system_a will resize from 0 bytes to 867106816 bytes
extracting system_dlkm.img (10 MB) to disk… took 0.033s
[liblp] Partition system_dlkm_a will resize from 0 bytes to 10964992 bytes
extracting system_ext.img (406 MB) to disk… took 2.001s
[liblp] Partition system_ext_a will resize from 0 bytes to 425959424 bytes
extracting system_other.img (15 MB) to disk… took 0.082s
[liblp] Partition system_b will resize from 0 bytes to 16416768 bytes
extracting vendor.img (794 MB) to disk… took 3.889s
[liblp] Partition vendor_a will resize from 0 bytes to 833581056 bytes
extracting vendor_dlkm.img (26 MB) to disk… took 0.096s
[liblp] Partition vendor_dlkm_a will resize from 0 bytes to 27418624 bytes
archive does not contain ‘vendor_other.img’
Sending sparse ‘super’ 1/14 (254972 KB) OKAY [ 6.852s]
Writing ‘super’ OKAY [ 0.353s]
Sending sparse ‘super’ 2/14 (254972 KB) OKAY [ 6.934s]
Writing ‘super’ OKAY [ 0.349s]
Sending sparse ‘super’ 3/14 (254972 KB) OKAY [ 7.687s]
Writing ‘super’ OKAY [ 0.355s]
Sending sparse ‘super’ 4/14 (254972 KB) OKAY [ 7.879s]
Writing ‘super’ OKAY [ 0.354s]
Sending sparse ‘super’ 5/14 (254972 KB) OKAY [ 7.912s]
Writing ‘super’ OKAY [ 0.350s]
Sending sparse ‘super’ 6/14 (254972 KB) OKAY [ 8.079s]
Writing ‘super’ OKAY [ 0.352s]
Sending sparse ‘super’ 7/14 (254972 KB) OKAY [ 8.096s]
Writing ‘super’ OKAY [ 0.350s]
Sending sparse ‘super’ 8/14 (254972 KB) OKAY [ 7.495s]
Writing ‘super’ OKAY [ 0.356s]
Sending sparse ‘super’ 9/14 (254972 KB) OKAY [ 7.936s]
Writing ‘super’ OKAY [ 0.357s]
Sending sparse ‘super’ 10/14 (254972 KB) OKAY [ 8.056s]
Writing ‘super’ OKAY [ 0.348s]
Sending sparse ‘super’ 11/14 (254972 KB) OKAY [ 8.096s]
Writing ‘super’ OKAY [ 0.353s]
Sending sparse ‘super’ 12/14 (254972 KB) OKAY [ 7.853s]
Writing ‘super’ OKAY [ 0.355s]
Sending sparse ‘super’ 13/14 (254972 KB) OKAY [ 7.729s]
Writing ‘super’ OKAY [ 0.349s]
Sending sparse ‘super’ 14/14 (110164 KB) OKAY [ 3.465s]
Writing ‘super’ OKAY [ 0.178s]
archive does not contain ‘boot_other.img’
archive does not contain ‘odm.img’
archive does not contain ‘odm_dlkm.img’
archive does not contain ‘vendor_other.img’
Finished. Total time: 131.585s
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 29.022s
Warning: skip copying abl image avb footer (abl partition size: 0, abl image size: 1785856).
Sending ‘abl’ (1744 KB) OKAY [ 0.063s]
Writing ‘abl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl1 image avb footer (bl1 partition size: 0, bl1 image size: 16384).
Sending ‘bl1’ (16 KB) OKAY [ 0.001s]
Writing ‘bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl2 image avb footer (bl2 partition size: 0, bl2 image size: 536576).
Sending ‘bl2’ (524 KB) OKAY [ 0.021s]
Writing ‘bl2’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl31 image avb footer (bl31 partition size: 0, bl31 image size: 106496).
Sending ‘bl31’ (104 KB) OKAY [ 0.007s]
Writing ‘bl31’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gcf image avb footer (gcf partition size: 0, gcf image size: 8192).
Sending ‘gcf’ (8 KB) OKAY [ 0.002s]
Writing ‘gcf’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa_bl1 image avb footer (gsa_bl1 partition size: 0, gsa_bl1 image size: 32768).
Sending ‘gsa_bl1’ (32 KB) OKAY [ 0.002s]
Writing ‘gsa_bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa image avb footer (gsa partition size: 0, gsa image size: 348160).
Sending ‘gsa’ (340 KB) OKAY [ 0.015s]
Writing ‘gsa’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying ldfw image avb footer (ldfw partition size: 0, ldfw image size: 2392064).
Sending ‘ldfw’ (2336 KB) OKAY [ 0.075s]
Writing ‘ldfw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying pbl image avb footer (pbl partition size: 0, pbl image size: 49152).
Sending ‘pbl’ (48 KB) OKAY [ 0.002s]
Writing ‘pbl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying tzsw image avb footer (tzsw partition size: 0, tzsw image size: 7917568).
Sending ‘tzsw’ (7732 KB) OKAY [ 0.244s]
Writing ‘tzsw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Rebooting into bootloader OKAY [ 0.001s]
Finished. Total time: 0.051s
< waiting for any device >
OKAY [ 0.176s]
Finished. Total time: 0.176s

[chrisrg]

@seb

I don’t know if it’s better to leave it unlocked?).

Wise move. Best not lock until you get a running system.
That’s progress though, your log is the same as mine for shiba so I would say that’s a good flash; fastboot is not a problem.

So the problem is with the build or the device.

@seb

What’s weird is that the installation of lineage-21.0-20240315 goes very well

What was the last stock version before you started?

Nice one with tidying up the logs by the way!

[seb]

It’s a new one, I didn’t take the time to watch the version…
I just wanted to quickly switch stock Android
I think it was Android 14, wasn’t it?

So if lineageos installs correctly, it would be a problem with the iodeos build, right?

@chrisrg

Nice one with tidying up the logs by the way!

Yes I find it more practical for everyone

[chrisrg]

@seb

I think it was Android 14, wasn’t it?

Yes, this was the starting point for the 8 series.
If it was brand new in sealed box it would likely have been an early build of the os and would seek to update when connected to wifi.

@seb

So if lineageos installs correctly, it would be a problem with the iodeos build, right?

I’m not sure. Maybe. @vince31fr would be able to answer that definitively.

It’s just that in recent months I’ve had some install problems that seemed related to stock vs. target for installation OS and security patch dates. I make copious notes but I can’t find any entries for this at the moment.

By the way, shiba has just had an update from LOS so things are on the move again. There might be another iode beta on the horizon.

[seb]

@chrisrg

If it was brand new in sealed box it would likely have been an early build of the os and would seek to update when connected to wifi.

I skiped this update !
I will try to goback to stock version and reflash iodeos

[chrisrg]

No no, hang on. Skipping the update is fine. Updating google to latest is not the way to go.

If you wanted to flash stock anyway it would be better to do it as I describe in post #22.

[seb]

Oops, I didn’t see your response
It doesn’t work anyway, there is an error at the end of the installation via rescue mode on the site Google Pixel - Update and Software Repair
So I’m still in the same state

[seb]

Is it better to wait for the next update or is there something else I could try?

[chrisrg]

You could try flashing stock (manually) in the way I suggested earlier. This will put your device on stock with Dec 23 security patch followed by an update to Jan security patch which would be the ideal base for installing iodeOS with Feb security patch.

Don’t try locking bootloader until you have a running version of iode on your device (if it works)

Step 1. From fastboot, flash Dec 23 Factory Image version of stock. When the device has rebooted go through setup to reset usb debugging etc, and then…

Step 2. …boot the stock recovery and sideload (without wiping) Jan 23 OTA version of stock.

Step 3. From fastboot, flash iode.

Google provides separate Factory images and OTA images for this purpose, and full instructions if you need them.

[seb]

Thanks for this detailed guide and direct download links @chrisrg !
I will do this tomorrow

[seb]

I passed step 1 without any problem.
The phone booted correctly to the December stock build.

Step 2 did not work because when I rebooted recovery, the phone was in “recovery” and not in “sideload” so it was impossible to sideload the OTA version from January.

Résumé

adb devices
List of devices attached
xxx recovery

I still tried to flash iodeOS again but that didn’t change the initial problem.

Résumé

./flash-all.sh
Erasing ‘avb_custom_key’ (bootloader) avb custom key: erase done
OKAY [ 0.057s]
Finished. Total time: 0.059s
Warning: skip copying avb_custom_key image avb footer (avb_custom_key partition size: 0, avb_custom_key image size: 1032).
Sending ‘avb_custom_key’ (1 KB) OKAY [ 0.001s]
Writing ‘avb_custom_key’ (bootloader) avb custom key: flash done
OKAY [ 0.032s]
Finished. Total time: 0.035s
Warning: metadata type is raw, but ext4 was requested for formatting.
mke2fs 1.46.6 (1-Feb-2023)
Creating filesystem with 16384 4k blocks and 16384 inodes

Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done

Sending ‘metadata’ (76 KB) OKAY [ 0.002s]
Writing ‘metadata’ OKAY [ 0.005s]
Finished. Total time: 0.015s
Erasing ‘metadata’ OKAY [ 0.008s]
Finished. Total time: 0.008s
Warning: userdata type is raw, but f2fs was requested for formatting.

F2FS-tools: mkfs.f2fs Ver: 1.16.0 (2023-04-11)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Enable Project quota
Info: not exist /proc/version!
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 479891624 (234322 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
Info: add quota type = 2 => 6
Info: format version with
“6.5.0-26-generic”
[f2fs_init_sit_area: 640] Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 674] Filling nat area at offset 0x01a00000
[f2fs_write_root_inode:1292] Writing root inode (hot node), 2c000 0 200 at offset 0x00180224
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c601, 0002c602
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180225
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c603, 0002c604
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180226
[f2fs_write_default_quota:1368] Writing quota data, at offset 0002c605, 0002c606
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 2c000 0 200 at offset 0x00180227
[f2fs_update_nat_root:1479] Writing nat root, at offset 0x00001a00
[f2fs_add_default_dentry_root:1676] Writing default dentry root, at offset 0x0002c600
Info: Overprovision ratio = 0.300%
Info: Overprovision segments = 351 (GC reserved = 340)
[f2fs_write_check_point_pack: 837] Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 993] Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack:1020] Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack:1032] Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack:1043] Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack:1051] Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack:1071] Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack:1092] Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack:1111] Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1144] Writing super block, at offset 0x00000000
Info: format successful
Sending ‘userdata’ (97 KB) OKAY [ 0.003s]
Writing ‘userdata’ OKAY [ 0.169s]
Finished. Total time: 0.458s
Erasing ‘userdata’ OKAY [ 0.130s]
Finished. Total time: 0.131s
Sending ‘modem_a’ (102252 KB) OKAY [ 3.136s]
Writing ‘modem_a’ OKAY [ 0.167s]
Finished. Total time: 3.428s

Bootloader Version…: ripcurrent-14.1-11012321
Baseband Version…: g5300i-230927-231102-B-11040898
Serial Number…: xxx

extracting android-info.txt (0 MB) to RAM…
Checking ‘product’ OKAY [ 0.000s]
Setting current slot to ‘a’ OKAY [ 0.090s]
extracting boot.img (64 MB) to disk… took 0.210s
archive does not contain ‘boot.sig’
Sending ‘boot_a’ (65536 KB) OKAY [ 1.997s]
Writing ‘boot_a’ OKAY [ 0.124s]
extracting init_boot.img (8 MB) to disk… took 0.028s
archive does not contain ‘init_boot.sig’
Sending ‘init_boot_a’ (8192 KB) OKAY [ 0.236s]
Writing ‘init_boot_a’ OKAY [ 0.014s]
extracting dtbo.img (16 MB) to disk… took 0.046s
archive does not contain ‘dtbo.sig’
Sending ‘dtbo_a’ (16384 KB) OKAY [ 0.480s]
Writing ‘dtbo_a’ OKAY [ 0.024s]
archive does not contain ‘dt.img’
extracting pvmfw.img (1 MB) to disk… took 0.014s
archive does not contain ‘pvmfw.sig’
Sending ‘pvmfw_a’ (1024 KB) OKAY [ 0.029s]
Writing ‘pvmfw_a’ OKAY [ 0.006s]
archive does not contain ‘recovery.img’
extracting vbmeta.img (0 MB) to disk… took 0.004s
archive does not contain ‘vbmeta.sig’
Sending ‘vbmeta_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_a’ OKAY [ 0.004s]
extracting vbmeta_system.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_system.sig’
Sending ‘vbmeta_system_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_system_a’ OKAY [ 0.004s]
extracting vbmeta_vendor.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_vendor.sig’
Sending ‘vbmeta_vendor_a’ (4 KB) OKAY [ 0.001s]
Writing ‘vbmeta_vendor_a’ OKAY [ 0.004s]
extracting vendor_boot.img (64 MB) to disk… took 0.264s
archive does not contain ‘vendor_boot.sig’
Sending ‘vendor_boot_a’ (65536 KB) OKAY [ 1.818s]
Writing ‘vendor_boot_a’ OKAY [ 0.125s]
extracting vendor_kernel_boot.img (64 MB) to disk… took 0.150s
archive does not contain ‘vendor_kernel_boot.sig’
Sending ‘vendor_kernel_boot_a’ (65536 KB) OKAY [ 1.837s]
Writing ‘vendor_kernel_boot_a’ OKAY [ 0.118s]
extracting super_empty.img (0 MB) to disk… took 0.000s
extracting product.img (1264 MB) to disk… took 4.568s
[liblp] Partition product_a will resize from 0 bytes to 1325514752 bytes
extracting system.img (826 MB) to disk… took 3.750s
[liblp] Partition system_a will resize from 0 bytes to 867106816 bytes
extracting system_dlkm.img (10 MB) to disk… took 0.026s
[liblp] Partition system_dlkm_a will resize from 0 bytes to 10964992 bytes
extracting system_ext.img (406 MB) to disk… took 1.575s
[liblp] Partition system_ext_a will resize from 0 bytes to 425959424 bytes
extracting system_other.img (15 MB) to disk… took 0.068s
[liblp] Partition system_b will resize from 0 bytes to 16416768 bytes
extracting vendor.img (794 MB) to disk… took 2.997s
[liblp] Partition vendor_a will resize from 0 bytes to 833581056 bytes
extracting vendor_dlkm.img (26 MB) to disk… took 0.174s
[liblp] Partition vendor_dlkm_a will resize from 0 bytes to 27418624 bytes
archive does not contain ‘vendor_other.img’
Sending sparse ‘super’ 1/14 (254972 KB) OKAY [ 7.927s]
Writing ‘super’ OKAY [ 0.354s]
Sending sparse ‘super’ 2/14 (254972 KB) OKAY [ 7.722s]
Writing ‘super’ OKAY [ 0.358s]
Sending sparse ‘super’ 3/14 (254972 KB) OKAY [ 7.839s]
Writing ‘super’ OKAY [ 0.351s]
Sending sparse ‘super’ 4/14 (254972 KB) OKAY [ 7.591s]
Writing ‘super’ OKAY [ 0.351s]
Sending sparse ‘super’ 5/14 (254972 KB) OKAY [ 7.275s]
Writing ‘super’ OKAY [ 0.351s]
Sending sparse ‘super’ 6/14 (254972 KB) OKAY [ 8.038s]
Writing ‘super’ OKAY [ 0.361s]
Sending sparse ‘super’ 7/14 (254972 KB) OKAY [ 7.616s]
Writing ‘super’ OKAY [ 0.350s]
Sending sparse ‘super’ 8/14 (254972 KB) OKAY [ 7.668s]
Writing ‘super’ OKAY [ 0.352s]
Sending sparse ‘super’ 9/14 (254972 KB) OKAY [ 7.799s]
Writing ‘super’ OKAY [ 0.359s]
Sending sparse ‘super’ 10/14 (254972 KB) OKAY [ 8.123s]
Writing ‘super’ OKAY [ 0.352s]
Sending sparse ‘super’ 11/14 (254972 KB) OKAY [ 7.654s]
Writing ‘super’ OKAY [ 0.361s]
Sending sparse ‘super’ 12/14 (254972 KB) OKAY [ 7.238s]
Writing ‘super’ OKAY [ 0.351s]
Sending sparse ‘super’ 13/14 (254972 KB) OKAY [ 8.253s]
Writing ‘super’ OKAY [ 0.352s]
Sending sparse ‘super’ 14/14 (110164 KB) OKAY [ 3.548s]
Writing ‘super’ OKAY [ 0.179s]
archive does not contain ‘boot_other.img’
archive does not contain ‘odm.img’
archive does not contain ‘odm_dlkm.img’
archive does not contain ‘vendor_other.img’
Finished. Total time: 130.452s
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 29.024s
Warning: skip copying abl image avb footer (abl partition size: 0, abl image size: 1785856).
Sending ‘abl’ (1744 KB) OKAY [ 0.055s]
Writing ‘abl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl1 image avb footer (bl1 partition size: 0, bl1 image size: 16384).
Sending ‘bl1’ (16 KB) OKAY [ 0.003s]
Writing ‘bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl2 image avb footer (bl2 partition size: 0, bl2 image size: 536576).
Sending ‘bl2’ (524 KB) OKAY [ 0.026s]
Writing ‘bl2’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl31 image avb footer (bl31 partition size: 0, bl31 image size: 106496).
Sending ‘bl31’ (104 KB) OKAY [ 0.006s]
Writing ‘bl31’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gcf image avb footer (gcf partition size: 0, gcf image size: 8192).
Sending ‘gcf’ (8 KB) OKAY [ 0.003s]
Writing ‘gcf’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa_bl1 image avb footer (gsa_bl1 partition size: 0, gsa_bl1 image size: 32768).
Sending ‘gsa_bl1’ (32 KB) OKAY [ 0.001s]
Writing ‘gsa_bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa image avb footer (gsa partition size: 0, gsa image size: 348160).
Sending ‘gsa’ (340 KB) OKAY [ 0.011s]
Writing ‘gsa’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying ldfw image avb footer (ldfw partition size: 0, ldfw image size: 2392064).
Sending ‘ldfw’ (2336 KB) OKAY [ 0.068s]
Writing ‘ldfw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying pbl image avb footer (pbl partition size: 0, pbl image size: 49152).
Sending ‘pbl’ (48 KB) OKAY [ 0.002s]
Writing ‘pbl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying tzsw image avb footer (tzsw partition size: 0, tzsw image size: 7917568).
Sending ‘tzsw’ (7732 KB) OKAY [ 0.236s]
Writing ‘tzsw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.051s
< waiting for any device >
OKAY [ 0.174s]
Finished. Total time: 0.175s

I then tried to install calyxOS. Everything went correctly and the system started up fine.
Here is the calyx installation log for information if it can help resolve the iodeOS installation problem :

Résumé

chmod +x device-flasher.linux
./device-flasher.linux
Android Factory Image Flasher version 1.0.9
Extracting husky-factory-24506000.zip
Downloading https://dl.google.com/android/repository/platform-tools_r33.0.3-linux.zip
Downloading… 7.5 MB downloaded
Verifying platform-tools_r33.0.3-linux.zip
Extracting platform-tools_r33.0.3-linux.zip

1. Connect to a wifi network and ensure that no SIM cards are installed
2. Enable Developer Options on device (Settings → About Phone → tap “Build number” 7 times)
3. Enable USB debugging on device (Settings → System → Advanced → Developer Options) and allow the computer to debug (hit “OK” on the popup when USB is connected)
4. Enable OEM Unlocking (in the same Developer Options menu)

Press ENTER to continue

Detected husky xxx

Devices to be flashed:
husky xxx

Press ENTER to continue
Unlocking husky xxx bootloader…
5. Please use the volume and power keys on the device to unlock the bootloader
Flashing husky xxx bootloader…
Sending ‘bootloader_b’ (17717 KB) OKAY [ 0.526s]
Writing ‘bootloader_b’ (bootloader) Flashing pack version ripcurrent-14.4-11403750
(bootloader) flashing platform zuma
(bootloader) Validating partition ufs
(bootloader) Validating partition ufs
(bootloader) Validating partition partition:0
(bootloader) Validating partition partition:1
(bootloader) Validating partition partition:2
(bootloader) Validating partition partition:3
(bootloader) Validating partition bl1_b
(bootloader) Validating partition pbl_b
(bootloader) Validating partition bl2_b
(bootloader) Validating partition abl_b
(bootloader) Validating partition bl31_b
(bootloader) Validating partition tzsw_b
(bootloader) Validating partition gsa_b
(bootloader) Validating partition gsa_bl1_b
(bootloader) Validating partition ldfw_b
(bootloader) Validating partition gcf_b
(bootloader) Flashing partition ufs
(bootloader) Flashing partition ufs
(bootloader) Flashing partition partition:0
(bootloader) Flashing partition partition:1
(bootloader) Flashing partition partition:2
(bootloader) Flashing partition partition:3
(bootloader) Flashing partition bl1_b
(bootloader) Flashing partition pbl_b
(bootloader) Flashing partition bl2_b
(bootloader) Flashing partition abl_b
(bootloader) Flashing partition bl31_b
(bootloader) Flashing partition tzsw_b
(bootloader) Flashing partition gsa_b
(bootloader) Flashing partition gsa_bl1_b
(bootloader) Flashing partition ldfw_b
(bootloader) Flashing partition gcf_b
(bootloader) Loading sideload ufsfwupdate
OKAY [ 0.088s]
Finished. Total time: 0.615s
Setting current slot to ‘b’ OKAY [ 0.089s]
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.290s
< waiting for xxx >
Sending ‘bootloader_a’ (17717 KB) OKAY [ 0.542s]
Writing ‘bootloader_a’ (bootloader) Flashing pack version ripcurrent-14.4-11403750
(bootloader) flashing platform zuma
(bootloader) Validating partition ufs
(bootloader) Validating partition ufs
(bootloader) Validating partition partition:0
(bootloader) Validating partition partition:1
(bootloader) Validating partition partition:2
(bootloader) Validating partition partition:3
(bootloader) Validating partition bl1_a
(bootloader) Validating partition pbl_a
(bootloader) Validating partition bl2_a
(bootloader) Validating partition abl_a
(bootloader) Validating partition bl31_a
(bootloader) Validating partition tzsw_a
(bootloader) Validating partition gsa_a
(bootloader) Validating partition gsa_bl1_a
(bootloader) Validating partition ldfw_a
(bootloader) Validating partition gcf_a
(bootloader) Flashing partition ufs
(bootloader) Flashing partition ufs
(bootloader) Flashing partition partition:0
(bootloader) Flashing partition partition:1
(bootloader) Flashing partition partition:2
(bootloader) Flashing partition partition:3
(bootloader) Flashing partition bl1_a
(bootloader) Flashing partition pbl_a
(bootloader) Flashing partition bl2_a
(bootloader) Flashing partition abl_a
(bootloader) Flashing partition bl31_a
(bootloader) Flashing partition tzsw_a
(bootloader) Flashing partition gsa_a
(bootloader) Flashing partition gsa_bl1_a
(bootloader) Flashing partition ldfw_a
(bootloader) Flashing partition gcf_a
(bootloader) Loading sideload ufsfwupdate
OKAY [ 0.090s]
Finished. Total time: 0.634s
Setting current slot to ‘a’ OKAY [ 0.077s]
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.278s
< waiting for xxx >
Sending ‘radio_b’ (104712 KB) OKAY [ 3.235s]
Writing ‘radio_b’ (bootloader) Flashing pack version g5300i-231218-240202-M-11396366
(bootloader) Flashing partition modem_b
OKAY [ 0.141s]
Finished. Total time: 3.377s
Setting current slot to ‘b’ OKAY [ 0.085s]
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.287s
< waiting for xxx >
Sending ‘radio_a’ (104712 KB) OKAY [ 3.228s]
Writing ‘radio_a’ (bootloader) Flashing pack version g5300i-231218-240202-M-11396366
(bootloader) Flashing partition modem_a
OKAY [ 0.134s]
Finished. Total time: 3.364s
Setting current slot to ‘a’ OKAY [ 0.078s]
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.279s
< waiting for xxx >
Erasing ‘avb_custom_key’ (bootloader) avb custom key: erase done
OKAY [ 0.023s]
Finished. Total time: 0.024s
Sending ‘avb_custom_key’ (1 KB) OKAY [ 0.001s]
Writing ‘avb_custom_key’ (bootloader) avb custom key: flash done
OKAY [ 0.033s]
Finished. Total time: 0.035s

Bootloader Version…: ripcurrent-14.4-11403750
Baseband Version…: g5300i-231218-240202-B-11396366
Serial Number…: xxx

extracting android-info.txt (0 MB) to RAM…
Checking ‘version-baseband’ OKAY [ 0.000s]
Checking ‘product’ OKAY [ 0.000s]
Checking ‘version-bootloader’ OKAY [ 0.000s]
Setting current slot to ‘a’ OKAY [ 0.091s]
extracting boot.img (64 MB) to disk… took 0.214s
archive does not contain ‘boot.sig’
Sending ‘boot_a’ (65536 KB) OKAY [ 1.990s]
Writing ‘boot_a’ OKAY [ 0.093s]
extracting init_boot.img (8 MB) to disk… took 0.030s
archive does not contain ‘init_boot.sig’
Sending ‘init_boot_a’ (8192 KB) OKAY [ 0.261s]
Writing ‘init_boot_a’ OKAY [ 0.014s]
extracting dtbo.img (16 MB) to disk… took 0.052s
archive does not contain ‘dtbo.sig’
Sending ‘dtbo_a’ (16384 KB) OKAY [ 0.494s]
Writing ‘dtbo_a’ OKAY [ 0.023s]
archive does not contain ‘dt.img’
extracting pvmfw.img (1 MB) to disk… took 0.011s
archive does not contain ‘pvmfw.sig’
Sending ‘pvmfw_a’ (1024 KB) OKAY [ 0.030s]
Writing ‘pvmfw_a’ OKAY [ 0.006s]
archive does not contain ‘recovery.img’
extracting vbmeta.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta.sig’
Sending ‘vbmeta_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_a’ OKAY [ 0.004s]
extracting vbmeta_system.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_system.sig’
Sending ‘vbmeta_system_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_system_a’ OKAY [ 0.004s]
extracting vbmeta_vendor.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_vendor.sig’
Sending ‘vbmeta_vendor_a’ (4 KB) OKAY [ 0.001s]
Writing ‘vbmeta_vendor_a’ OKAY [ 0.004s]
extracting vendor_boot.img (64 MB) to disk… took 0.233s
archive does not contain ‘vendor_boot.sig’
Sending ‘vendor_boot_a’ (65536 KB) OKAY [ 2.031s]
Writing ‘vendor_boot_a’ OKAY [ 0.093s]
extracting vendor_kernel_boot.img (64 MB) to disk… took 0.162s
archive does not contain ‘vendor_kernel_boot.sig’
Sending ‘vendor_kernel_boot_a’ (65536 KB) OKAY [ 2.010s]
Writing ‘vendor_kernel_boot_a’ OKAY [ 0.087s]
extracting super_empty.img (0 MB) to disk… took 0.000s
Rebooting into fastboot OKAY [ 0.000s]
< waiting for xxx >
Sending ‘super’ (5 KB) OKAY [ 0.002s]
Updating super partition OKAY [ 0.161s]
Resizing ‘product_a’ OKAY [ 0.021s]
Resizing ‘system_a’ OKAY [ 0.011s]
Resizing ‘system_dlkm_a’ OKAY [ 0.022s]
Resizing ‘system_ext_a’ OKAY [ 0.006s]
Resizing ‘system_b’ OKAY [ 0.007s]
Resizing ‘vendor_a’ OKAY [ 0.020s]
Resizing ‘vendor_dlkm_a’ OKAY [ 0.012s]
Resizing ‘vendor_b’ OKAY [ 0.029s]
archive does not contain ‘boot_other.img’
archive does not contain ‘odm.img’
archive does not contain ‘odm_dlkm.img’
extracting product.img (1412 MB) to disk… took 5.155s
archive does not contain ‘product.sig’
Resizing ‘product_a’ OKAY [ 0.010s]
Sending sparse ‘product_a’ 1/6 (262108 KB) OKAY [ 8.027s]
Writing ‘product_a’ OKAY [ 0.503s]
Sending sparse ‘product_a’ 2/6 (262128 KB) OKAY [ 8.093s]
Writing ‘product_a’ OKAY [ 0.506s]
Sending sparse ‘product_a’ 3/6 (262120 KB) OKAY [ 8.427s]
Writing ‘product_a’ OKAY [ 0.537s]
Sending sparse ‘product_a’ 4/6 (262120 KB) OKAY [ 8.666s]
Writing ‘product_a’ OKAY [ 0.522s]
Sending sparse ‘product_a’ 5/6 (262116 KB) OKAY [ 8.562s]
Writing ‘product_a’ OKAY [ 0.535s]
Sending sparse ‘product_a’ 6/6 (131320 KB) OKAY [ 4.287s]
Writing ‘product_a’ OKAY [ 0.326s]
extracting system.img (801 MB) to disk… took 3.348s
archive does not contain ‘system.sig’
Resizing ‘system_a’ OKAY [ 0.017s]
Sending sparse ‘system_a’ 1/4 (262120 KB) OKAY [ 8.559s]
Writing ‘system_a’ OKAY [ 0.659s]
Sending sparse ‘system_a’ 2/4 (262112 KB) OKAY [ 8.771s]
Writing ‘system_a’ OKAY [ 0.648s]
Sending sparse ‘system_a’ 3/4 (262140 KB) OKAY [ 8.761s]
Writing ‘system_a’ OKAY [ 0.603s]
Sending sparse ‘system_a’ 4/4 (31948 KB) OKAY [ 1.070s]
Writing ‘system_a’ OKAY [ 0.207s]
extracting system_dlkm.img (10 MB) to disk… took 0.028s
archive does not contain ‘system_dlkm.sig’
Resizing ‘system_dlkm_a’ OKAY [ 0.012s]
Sending ‘system_dlkm_a’ (10884 KB) OKAY [ 0.345s]
Writing ‘system_dlkm_a’ OKAY [ 0.102s]
extracting system_ext.img (325 MB) to disk… took 1.392s
archive does not contain ‘system_ext.sig’
Resizing ‘system_ext_a’ OKAY [ 0.014s]
Sending sparse ‘system_ext_a’ 1/2 (262140 KB) OKAY [ 8.706s]
Writing ‘system_ext_a’ OKAY [ 0.650s]
Sending sparse ‘system_ext_a’ 2/2 (69700 KB) OKAY [ 2.396s]
Writing ‘system_ext_a’ OKAY [ 0.246s]
extracting system_other.img (17 MB) to disk… took 0.094s
archive does not contain ‘system.sig’
Resizing ‘system_b’ OKAY [ 0.026s]
Sending ‘system_b’ (17968 KB) OKAY [ 0.577s]
Writing ‘system_b’ OKAY [ 0.128s]
extracting vendor.img (690 MB) to disk… took 2.677s
archive does not contain ‘vendor.sig’
Resizing ‘vendor_a’ OKAY [ 0.025s]
Sending sparse ‘vendor_a’ 1/3 (262120 KB) OKAY [ 8.625s]
Writing ‘vendor_a’ OKAY [ 0.699s]
Sending sparse ‘vendor_a’ 2/3 (262120 KB) OKAY [ 8.771s]
Writing ‘vendor_a’ OKAY [ 0.662s]
Sending sparse ‘vendor_a’ 3/3 (180736 KB) OKAY [ 6.054s]
Writing ‘vendor_a’ OKAY [ 0.500s]
extracting vendor_dlkm.img (26 MB) to disk… took 0.083s
archive does not contain ‘vendor_dlkm.sig’
Resizing ‘vendor_dlkm_a’ OKAY [ 0.045s]
Sending ‘vendor_dlkm_a’ (26784 KB) OKAY [ 0.884s]
Writing ‘vendor_dlkm_a’ OKAY [ 0.139s]
archive does not contain ‘vendor_other.img’
Erasing ‘userdata’ OKAY [ 0.130s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Erasing ‘metadata’ OKAY [ 0.010s]
Erase successful, but not automatically formatting.
File system type raw not supported.
Finished. Total time: 166.021s
Rebooting into bootloader OKAY [ 0.000s]
Finished. Total time: 0.051s
Locking husky xxx bootloader…

I didn’t lock the bootloader at the end

[chrisrg]

@seb

when I rebooted recovery, the phone was in “recovery” and not in “sideload” so it was impossible to sideload the OTA

Probably you did not select “apply update” in stock recovery, as per google instructions on the ota page.

@seb

I didn’t lock the bootloader at the end

You would be OK locking on calyx; the custom key has been flashed. Up to you.

I think that might be the end of trying to install that iode package! No point in flogging a dead horse.

Hopefully it shouldn’t be too much longer before another version is released. I notice that Lineage still hasn’t updated husky, but they have shiba.

[seb]

Thanks Chris
Yes, I’m going to wait for a new version of iodéOS and hope that the problem will be solved!

I’ll give updates of my tests here

Cheers

[seb]

Hi
I am testing GrapheneOS and I must admit that this ROM appeals to me enormously due to their approach of caging Google Play services (rather than using microg which has all the permissions), their speed and proactivity in providing security updates and many more advanced settings than those available as standard (more permissions settings, random Mac address, etc.).
By installing TrackerControl, we arrive at a very complete security and privacy protection system.
I still keep in mind to try iodéOS, hoping that the installation problem can be corrected soon!

[chrisrg]

Enjoy GOS!
Latest situation with iode for husky: there is a beta at the moment so an official update should appear on the website in the coming days. I’m sure you’ll notice.

[Unb9rn]

I have exactly the same issue - tried to flash the fastboot image (iode-5.0-20240426-husky-fastboot.zip) with flash-all.sh (from Linux machine) it seemingly went almost well:

Erasing 'avb_custom_key'                           (bootloader) avb custom key: erase done
OKAY [  0.026s]
Finished. Total time: 0.027s
Warning: skip copying avb_custom_key image avb footer (avb_custom_key partition size: 0, avb_custom_key image size: 1032).
Sending 'avb_custom_key' (1 KB)                    OKAY [  0.001s]
Writing 'avb_custom_key'                           (bootloader) avb custom key: flash done
OKAY [  0.034s]
Finished. Total time: 0.036s
Warning: metadata type is raw, but ext4 was requested for formatting.
mke2fs 1.46.6 (1-Feb-2023)
Creating filesystem with 16384 4k blocks and 16384 inodes

Allocating group tables: done                            
Writing inode tables: done                            
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done

Warning: skip copying metadata image avb footer due to sparse image.
Sending 'metadata' (76 KB)                         OKAY [  0.003s]
Writing 'metadata'                                 OKAY [  0.005s]
Finished. Total time: 0.016s
Erasing 'metadata'                                 OKAY [  0.006s]
Finished. Total time: 0.007s
Warning: userdata type is raw, but f2fs was requested for formatting.

    F2FS-tools: mkfs.f2fs Ver: 1.16.0 (2023-04-11)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Enable Project quota
Info: not exist /proc/version!
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 979734696 (478386 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
Info: add quota type = 2 => 6
Info: format version with
  "6.8.9-arch1-2"
[f2fs_init_sit_area: 638] 	Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 672] 	Filling nat area at offset 0x02a00000
[f2fs_add_default_dentry_root:1255] 	Writing default dentry root, at offset 0x4a200
[f2fs_write_root_inode:1300] 	Writing root inode (hot node), offset 0x49c00
[f2fs_write_default_quota:1387] 	Writing quota data, at offset 0004a201 (1/2)
[f2fs_write_default_quota:1387] 	Writing quota data, at offset 0004a202 (2/2)
[f2fs_write_qf_inode:1438] 	Writing quota inode (hot node), offset 0x49c01
[f2fs_write_default_quota:1387] 	Writing quota data, at offset 0004a203 (1/2)
[f2fs_write_default_quota:1387] 	Writing quota data, at offset 0004a204 (2/2)
[f2fs_write_qf_inode:1438] 	Writing quota inode (hot node), offset 0x49c02
[f2fs_write_default_quota:1387] 	Writing quota data, at offset 0004a205 (1/2)
[f2fs_write_default_quota:1387] 	Writing quota data, at offset 0004a206 (2/2)
[f2fs_write_qf_inode:1438] 	Writing quota inode (hot node), offset 0x49c03
[f2fs_update_nat_default:1475] 	Writing nat root, at offset 0x00002a00
Info: Overprovision ratio = 0.210%
Info: Overprovision segments = 502 (GC reserved = 483)
[f2fs_write_check_point_pack: 854] 	Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 942] 	Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack: 956] 	Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack: 968] 	Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack: 979] 	Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack: 987] 	Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack:1007] 	Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack:1028] 	Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack:1047] 	Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1080] 	Writing super block, at offset 0x00000000
Info: format successful
Warning: skip copying userdata image avb footer due to sparse image.
Sending 'userdata' (97 KB)                         OKAY [  0.005s]
Writing 'userdata'                                 OKAY [  0.137s]
Finished. Total time: 0.266s
Erasing 'userdata'                                 OKAY [  0.121s]
Finished. Total time: 0.122s
Sending 'abl_b' (1744 KB)                          OKAY [  0.066s]
Writing 'abl_b'                                    OKAY [  0.014s]
Finished. Total time: 0.083s
Sending 'bl1_b' (16 KB)                            OKAY [  0.001s]
Writing 'bl1_b'                                    OKAY [  0.009s]
Finished. Total time: 0.012s
Sending 'bl2_b' (524 KB)                           OKAY [  0.020s]
Writing 'bl2_b'                                    OKAY [  0.010s]
Finished. Total time: 0.034s
Sending 'bl31_b' (104 KB)                          OKAY [  0.004s]
Writing 'bl31_b'                                   OKAY [  0.009s]
Finished. Total time: 0.016s
Sending 'gcf_b' (8 KB)                             OKAY [  0.001s]
Writing 'gcf_b'                                    OKAY [  0.009s]
Finished. Total time: 0.011s
Sending 'gsa_bl1_b' (32 KB)                        OKAY [  0.002s]
Writing 'gsa_bl1_b'                                OKAY [  0.009s]
Finished. Total time: 0.013s
Sending 'gsa_b' (344 KB)                           OKAY [  0.012s]
Writing 'gsa_b'                                    OKAY [  0.010s]
Finished. Total time: 0.024s
Sending 'ldfw_b' (2336 KB)                         OKAY [  0.082s]
Writing 'ldfw_b'                                   OKAY [  0.015s]
Finished. Total time: 0.100s
Sending 'pbl_b' (48 KB)                            OKAY [  0.002s]
Writing 'pbl_b'                                    OKAY [  0.009s]
Finished. Total time: 0.013s
Sending 'tzsw_b' (7720 KB)                         OKAY [  0.278s]
Writing 'tzsw_b'                                   OKAY [  0.028s]
Finished. Total time: 0.313s
--------------------------------------------
Bootloader Version...: ripcurrent-14.4-11403750
Baseband Version.....: g5300i-231218-240202-B-11396366
Serial Number........: **************
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product'                                 OKAY [  0.000s]
Setting current slot to 'b'                        OKAY [  0.094s]
extracting fastboot-info.txt (0 MB) to RAM...
extracting super_empty.img (0 MB) to RAM...
extracting super_empty.img (0 MB) to disk... took 0.000s
extracting system.img (797 MB) to disk... took 2.016s
[liblp] Partition system_b will resize from 0 bytes to 836182016 bytes
extracting system_dlkm.img (10 MB) to disk... took 0.016s
[liblp] Partition system_dlkm_b will resize from 0 bytes to 11145216 bytes
extracting system_ext.img (432 MB) to disk... took 1.081s
[liblp] Partition system_ext_b will resize from 0 bytes to 453562368 bytes
extracting product.img (1354 MB) to disk... took 2.963s
[liblp] Partition product_b will resize from 0 bytes to 1420587008 bytes
extracting vendor.img (717 MB) to disk... took 1.649s
[liblp] Partition vendor_b will resize from 0 bytes to 752201728 bytes
extracting vendor_dlkm.img (26 MB) to disk... took 0.046s
[liblp] Partition vendor_dlkm_b will resize from 0 bytes to 27426816 bytes
extracting system_other.img (14 MB) to disk... took 0.042s
[liblp] Partition system_a will resize from 0 bytes to 15151104 bytes
extracting super_empty.img (0 MB) to RAM...
extracting boot.img (64 MB) to disk... took 0.136s
archive does not contain 'boot.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'boot_b' (65536 KB)                        OKAY [  2.623s]
Writing 'boot_b'                                   OKAY [  0.091s]
extracting super_empty.img (0 MB) to RAM...
extracting init_boot.img (8 MB) to disk... took 0.016s
archive does not contain 'init_boot.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'init_boot_b' (8192 KB)                    OKAY [  0.346s]
Writing 'init_boot_b'                              OKAY [  0.014s]
extracting super_empty.img (0 MB) to RAM...
extracting dtbo.img (16 MB) to disk... took 0.028s
archive does not contain 'dtbo.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'dtbo_b' (16384 KB)                        OKAY [  0.675s]
Writing 'dtbo_b'                                   OKAY [  0.027s]
extracting super_empty.img (0 MB) to RAM...
extracting vendor_kernel_boot.img (64 MB) to disk... took 0.114s
archive does not contain 'vendor_kernel_boot.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'vendor_kernel_boot_b' (65536 KB)          OKAY [  2.855s]
Writing 'vendor_kernel_boot_b'                     OKAY [  0.093s]
extracting super_empty.img (0 MB) to RAM...
extracting pvmfw.img (1 MB) to disk... took 0.005s
archive does not contain 'pvmfw.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'pvmfw_b' (1024 KB)                        OKAY [  0.040s]
Writing 'pvmfw_b'                                  OKAY [  0.006s]
extracting super_empty.img (0 MB) to RAM...
extracting vendor_boot.img (64 MB) to disk... took 0.133s
archive does not contain 'vendor_boot.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'vendor_boot_b' (65536 KB)                 OKAY [  2.462s]
Writing 'vendor_boot_b'                            OKAY [  0.085s]
extracting super_empty.img (0 MB) to RAM...
extracting vbmeta.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'vbmeta_b' (8 KB)                          OKAY [  0.001s]
Writing 'vbmeta_b'                                 OKAY [  0.005s]
extracting super_empty.img (0 MB) to RAM...
extracting vbmeta_system.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta_system.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'vbmeta_system_b' (8 KB)                   OKAY [  0.001s]
Writing 'vbmeta_system_b'                          OKAY [  0.005s]
extracting super_empty.img (0 MB) to RAM...
extracting vbmeta_vendor.img (0 MB) to disk... took 0.000s
archive does not contain 'vbmeta_vendor.sig'
extracting super_empty.img (0 MB) to RAM...
Sending 'vbmeta_vendor_b' (4 KB)                   OKAY [  0.001s]
Writing 'vbmeta_vendor_b'                          OKAY [  0.005s]
Sending sparse 'super' 1/14 (254972 KB)            OKAY [ 10.418s]
Writing 'super'                                    OKAY [  0.316s]
Sending sparse 'super' 2/14 (254972 KB)            OKAY [ 10.279s]
Writing 'super'                                    OKAY [  0.351s]
Sending sparse 'super' 3/14 (254972 KB)            OKAY [  9.148s]
Writing 'super'                                    OKAY [  0.345s]
Sending sparse 'super' 4/14 (254972 KB)            OKAY [  8.828s]
Writing 'super'                                    OKAY [  0.352s]
Sending sparse 'super' 5/14 (250544 KB)            OKAY [  9.377s]
Writing 'super'                                    OKAY [  0.340s]
Sending sparse 'super' 6/14 (254972 KB)            OKAY [  9.979s]
Writing 'super'                                    OKAY [  0.345s]
Sending sparse 'super' 7/14 (254972 KB)            OKAY [  9.853s]
Writing 'super'                                    OKAY [  0.352s]
Sending sparse 'super' 8/14 (254972 KB)            OKAY [  9.879s]
Writing 'super'                                    OKAY [  0.346s]
Sending sparse 'super' 9/14 (254972 KB)            OKAY [ 10.162s]
Writing 'super'                                    OKAY [  0.345s]
Sending sparse 'super' 10/14 (254972 KB)           OKAY [ 10.069s]
Writing 'super'                                    OKAY [  0.346s]
Sending sparse 'super' 11/14 (254972 KB)           OKAY [  9.778s]
Writing 'super'                                    OKAY [  0.360s]
Sending sparse 'super' 12/14 (254972 KB)           OKAY [  9.588s]
Writing 'super'                                    OKAY [  0.345s]
Sending sparse 'super' 13/14 (254972 KB)           OKAY [ 10.095s]
Writing 'super'                                    OKAY [  0.345s]
Sending sparse 'super' 14/14 (123668 KB)           OKAY [  5.121s]
Writing 'super'                                    OKAY [  0.192s]
Finished. Total time: 155.126s
Rebooting into bootloader                          OKAY [  0.000s]
Finished. Total time: 0.201s
< waiting for any device >
OKAY [  0.178s]
Finished. Total time: 0.178s

I’m worried about this message:

Warning: skip copying avb_custom_key image avb footer (avb_custom_key partition size: 0, avb_custom_key image size: 1032).

I thought avb_custom_key is a special case, but fastboot tries to flash it as an ordinary partition.
Tried to do the same thing with system’s fastboot (35.0.1) and google’s latest one - all return the same warning.

After trying to boot I got a brief Google logo and then this “android” splash that hangs and reboots.
Tried to flash using iode installer (0.2) - the result is identical (both in logs and behavior)

Then I tried to reach the recovery (iode recovery works fine) and flash the 5.1 beta OTA via sideload. It worked fine, the boot slot switched, but nothing else changed - logo - bootloop.

Locking and unlocking the bl, wiping data via recovery - nothing seems to help

[chrisrg]

@Unb9rn

I’m worried about this message:

That’s OK. I have exactly the same line in my successful flash of shiba, Pixel 8. Here’s a copy of my log from 14 March installation.

Summary

./flash-all.sh
Erasing ‘avb_custom_key’ (bootloader) avb custom key: erase done
OKAY [ 0.043s]
Finished. Total time: 0.044s
Warning: skip copying avb_custom_key image avb footer (avb_custom_key partition size: 0, avb_custom_key image size: 1032).
Sending ‘avb_custom_key’ (1 KB) OKAY [ 0.001s]
Writing ‘avb_custom_key’ (bootloader) avb custom key: flash done
OKAY [ 0.034s]
Finished. Total time: 0.036s
Warning: metadata type is raw, but ext4 was requested for formatting.
mke2fs 1.46.6 (1-Feb-2023)
Creating filesystem with 16384 4k blocks and 16384 inodes

Allocating group tables: done
Writing inode tables: done
Creating journal (1024 blocks): done
Writing superblocks and filesystem accounting information: done

Sending ‘metadata’ (76 KB) OKAY [ 0.003s]
Writing ‘metadata’ OKAY [ 0.008s]
Finished. Total time: 0.021s
Erasing ‘metadata’ OKAY [ 0.070s]
Finished. Total time: 0.071s
Warning: userdata type is raw, but f2fs was requested for formatting.

F2FS-tools: mkfs.f2fs Ver: 1.16.0 (2023-04-11)

Info: Disable heap-based policy
Info: Debug level = 1
Info: Trim is disabled
Info: Set conf for android
Info: Enable Project quota
Info: not exist /proc/version!
Info: Segments per section = 1
Info: Sections per zone = 1
Info: sector size = 512
Info: total sectors = 229970088 (112290 MB)
Info: zone aligned segment0 blkaddr: 512
Info: add quota type = 0 => 4
Info: add quota type = 1 => 5
Info: add quota type = 2 => 6
Info: format version with
“6.7.9-200.fc39.x86_64”
[f2fs_init_sit_area: 640] Filling sit area at offset 0x00600000
[f2fs_init_nat_area: 674] Filling nat area at offset 0x00e00000
[f2fs_write_root_inode:1292] Writing root inode (hot node), 1d200 0 200 at offset 0x00119296
[f2fs_write_default_quota:1368] Writing quota data, at offset 0001d801, 0001d802
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 1d200 0 200 at offset 0x00119297
[f2fs_write_default_quota:1368] Writing quota data, at offset 0001d803, 0001d804
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 1d200 0 200 at offset 0x00119298
[f2fs_write_default_quota:1368] Writing quota data, at offset 0001d805, 0001d806
[f2fs_write_qf_inode:1425] Writing quota inode (hot node), 1d200 0 200 at offset 0x00119299
[f2fs_update_nat_root:1479] Writing nat root, at offset 0x00000e00
[f2fs_add_default_dentry_root:1676] Writing default dentry root, at offset 0x0001d800
Info: Overprovision ratio = 0.430%
Info: Overprovision segments = 241 (GC reserved = 239)
[f2fs_write_check_point_pack: 837] Writing main segments, cp at offset 0x00000200
[f2fs_write_check_point_pack: 993] Writing Segment summary for HOT/WARM/COLD_DATA, at offset 0x00000201
[f2fs_write_check_point_pack:1020] Writing Segment summary for HOT_NODE, at offset 0x00000202
[f2fs_write_check_point_pack:1032] Writing Segment summary for WARM_NODE, at offset 0x00000203
[f2fs_write_check_point_pack:1043] Writing Segment summary for COLD_NODE, at offset 0x00000204
[f2fs_write_check_point_pack:1051] Writing cp page2, at offset 0x00000205
[f2fs_write_check_point_pack:1071] Writing NAT bits pages, at offset 0x000003fe
[f2fs_write_check_point_pack:1092] Writing cp page 1 of checkpoint pack 2, at offset 0x00000400
[f2fs_write_check_point_pack:1111] Writing cp page 2 of checkpoint pack 2, at offset 0x00000405
[f2fs_write_super_block:1144] Writing super block, at offset 0x00000000
Info: format successful
Sending ‘userdata’ (97 KB) OKAY [ 0.003s]
Writing ‘userdata’ OKAY [ 0.230s]
Finished. Total time: 0.390s
Erasing ‘userdata’ OKAY [ 0.710s]
Finished. Total time: 0.711s
Sending ‘modem_a’ (102252 KB) OKAY [ 3.014s]
Writing ‘modem_a’ OKAY [ 0.179s]
Finished. Total time: 3.275s

Bootloader Version…: ripcurrent-14.1-11208047
Baseband Version…: g5300i-230927-231102-B-11040898
Serial Number…: xxxxxxxxx

extracting android-info.txt (0 MB) to RAM…
Checking ‘product’ OKAY [ 0.000s]
Setting current slot to ‘a’ OKAY [ 0.081s]
extracting boot.img (64 MB) to disk… took 0.152s
archive does not contain ‘boot.sig’
Sending ‘boot_a’ (65536 KB) OKAY [ 1.875s]
Writing ‘boot_a’ OKAY [ 0.133s]
extracting init_boot.img (8 MB) to disk… took 0.036s
archive does not contain ‘init_boot.sig’
Sending ‘init_boot_a’ (8192 KB) OKAY [ 0.240s]
Writing ‘init_boot_a’ OKAY [ 0.015s]
extracting dtbo.img (16 MB) to disk… took 0.028s
archive does not contain ‘dtbo.sig’
Sending ‘dtbo_a’ (16384 KB) OKAY [ 0.405s]
Writing ‘dtbo_a’ OKAY [ 0.024s]
archive does not contain ‘dt.img’
extracting pvmfw.img (1 MB) to disk… took 0.003s
archive does not contain ‘pvmfw.sig’
Sending ‘pvmfw_a’ (1024 KB) OKAY [ 0.027s]
Writing ‘pvmfw_a’ OKAY [ 0.007s]
archive does not contain ‘recovery.img’
extracting vbmeta.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta.sig’
Sending ‘vbmeta_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_a’ OKAY [ 0.006s]
extracting vbmeta_system.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_system.sig’
Sending ‘vbmeta_system_a’ (8 KB) OKAY [ 0.001s]
Writing ‘vbmeta_system_a’ OKAY [ 0.005s]
extracting vbmeta_vendor.img (0 MB) to disk… took 0.000s
archive does not contain ‘vbmeta_vendor.sig’
Sending ‘vbmeta_vendor_a’ (4 KB) OKAY [ 0.001s]
Writing ‘vbmeta_vendor_a’ OKAY [ 0.005s]
extracting vendor_boot.img (64 MB) to disk… took 0.145s
archive does not contain ‘vendor_boot.sig’
Sending ‘vendor_boot_a’ (65536 KB) OKAY [ 1.791s]
Writing ‘vendor_boot_a’ OKAY [ 0.129s]
extracting vendor_kernel_boot.img (64 MB) to disk… took 0.137s
archive does not contain ‘vendor_kernel_boot.sig’
Sending ‘vendor_kernel_boot_a’ (65536 KB) OKAY [ 1.938s]
Writing ‘vendor_kernel_boot_a’ OKAY [ 0.134s]
extracting super_empty.img (0 MB) to disk… took 0.000s
extracting product.img (1260 MB) to disk… took 3.592s
[liblp] Partition product_a will resize from 0 bytes to 1321922560 bytes
extracting system.img (834 MB) to disk… took 2.585s
[liblp] Partition system_a will resize from 0 bytes to 874721280 bytes
extracting system_dlkm.img (10 MB) to disk… took 0.020s
[liblp] Partition system_dlkm_a will resize from 0 bytes to 10964992 bytes
extracting system_ext.img (406 MB) to disk… took 1.283s
[liblp] Partition system_ext_a will resize from 0 bytes to 425959424 bytes
extracting system_other.img (15 MB) to disk… took 0.058s
[liblp] Partition system_b will resize from 0 bytes to 16416768 bytes
extracting vendor.img (786 MB) to disk… took 2.284s
[liblp] Partition vendor_a will resize from 0 bytes to 824303616 bytes
extracting vendor_dlkm.img (26 MB) to disk… took 0.060s
[liblp] Partition vendor_dlkm_a will resize from 0 bytes to 27418624 bytes
archive does not contain ‘vendor_other.img’
Sending sparse ‘super’ 1/14 (254972 KB) OKAY [ 7.781s]
Writing ‘super’ OKAY [ 0.372s]
Sending sparse ‘super’ 2/14 (254972 KB) OKAY [ 7.665s]
Writing ‘super’ OKAY [ 0.373s]
Sending sparse ‘super’ 3/14 (254972 KB) OKAY [ 7.422s]
Writing ‘super’ OKAY [ 0.374s]
Sending sparse ‘super’ 4/14 (254972 KB) OKAY [ 7.710s]
Writing ‘super’ OKAY [ 0.374s]
Sending sparse ‘super’ 5/14 (254972 KB) OKAY [ 7.683s]
Writing ‘super’ OKAY [ 0.373s]
Sending sparse ‘super’ 6/14 (254972 KB) OKAY [ 7.744s]
Writing ‘super’ OKAY [ 0.382s]
Sending sparse ‘super’ 7/14 (254972 KB) OKAY [ 7.343s]
Writing ‘super’ OKAY [ 0.365s]
Sending sparse ‘super’ 8/14 (254972 KB) OKAY [ 7.630s]
Writing ‘super’ OKAY [ 0.372s]
Sending sparse ‘super’ 9/14 (254972 KB) OKAY [ 7.577s]
Writing ‘super’ OKAY [ 0.378s]
Sending sparse ‘super’ 10/14 (254972 KB) OKAY [ 7.650s]
Writing ‘super’ OKAY [ 0.365s]
Sending sparse ‘super’ 11/14 (254972 KB) OKAY [ 7.458s]
Writing ‘super’ OKAY [ 0.381s]
Sending sparse ‘super’ 12/14 (254972 KB) OKAY [ 7.398s]
Writing ‘super’ OKAY [ 0.370s]
Sending sparse ‘super’ 13/14 (254972 KB) OKAY [ 7.511s]
Writing ‘super’ OKAY [ 0.365s]
Sending sparse ‘super’ 14/14 (105032 KB) OKAY [ 3.134s]
Writing ‘super’ OKAY [ 0.193s]
archive does not contain ‘boot_other.img’
archive does not contain ‘odm.img’
archive does not contain ‘odm_dlkm.img’
archive does not contain ‘vendor_other.img’
Finished. Total time: 124.355s
Rebooting into fastboot OKAY [ 0.000s]
< waiting for any device >
Finished. Total time: 26.028s
Warning: skip copying abl image avb footer (abl partition size: 0, abl image size: 1785856).
Sending ‘abl’ (1744 KB) OKAY [ 0.061s]
Writing ‘abl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl1 image avb footer (bl1 partition size: 0, bl1 image size: 16384).
Sending ‘bl1’ (16 KB) OKAY [ 0.002s]
Writing ‘bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl2 image avb footer (bl2 partition size: 0, bl2 image size: 536576).
Sending ‘bl2’ (524 KB) OKAY [ 0.024s]
Writing ‘bl2’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying bl31 image avb footer (bl31 partition size: 0, bl31 image size: 106496).
Sending ‘bl31’ (104 KB) OKAY [ 0.006s]
Writing ‘bl31’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gcf image avb footer (gcf partition size: 0, gcf image size: 8192).
Sending ‘gcf’ (8 KB) OKAY [ 0.004s]
Writing ‘gcf’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa_bl1 image avb footer (gsa_bl1 partition size: 0, gsa_bl1 image size: 32768).
Sending ‘gsa_bl1’ (32 KB) OKAY [ 0.001s]
Writing ‘gsa_bl1’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying gsa image avb footer (gsa partition size: 0, gsa image size: 348160).
Sending ‘gsa’ (340 KB) OKAY [ 0.012s]
Writing ‘gsa’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying ldfw image avb footer (ldfw partition size: 0, ldfw image size: 2392064).
Sending ‘ldfw’ (2336 KB) OKAY [ 0.071s]
Writing ‘ldfw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying pbl image avb footer (pbl partition size: 0, pbl image size: 49152).
Sending ‘pbl’ (48 KB) OKAY [ 0.003s]
Writing ‘pbl’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Warning: skip copying tzsw image avb footer (tzsw partition size: 0, tzsw image size: 7917568).
Sending ‘tzsw’ (7732 KB) OKAY [ 0.250s]
Writing ‘tzsw’ FAILED (remote: ‘No such file or directory’)
fastboot: error: Command failed
Rebooting into bootloader OKAY [ 0.001s]
Finished. Total time: 0.051s
< waiting for any device >
OKAY [ 0.185s]
Finished. Total time: 0.185s

I’ve since re-installed and done beta updates up to yesterday with no problems.
I don’t know why husky is having these problems. It looks like others on XDA also are not managing to install.

[Unb9rn]

Tested on both Calyx and Graphene - you seem to be right, this message is okay. These both ROMs seem to boot fine. Also checked on LOS 21 - no problems either. Seems like there’s some problem with husky build.
Are there any success stories? I should probably report this as a bug to GitLab or something…