# Google Pixel 3 iode 3.6 flashing fails

**URL:** <https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528>\
**Category:** General Discussion\
**Created:** [11 May 2023 10:44 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528 "2023-05-11T10:44:03Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![samsmi](https://community.iode.tech/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@samsmi](https://community.iode.tech/u/samsmi)\
**Post date:** [11 May 2023 10:44 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528/1 "2023-05-11T10:44:03Z")

</div>

Hello,  
I’m new here. I purchased a google pixel 3 smartphone and wanted to install the latest iode image to it(iode-3.6-20230401-blueline-fastboot.zip).  
Unfortunately installation fails - these are the messages I’m getting shortly before it fails:  
extracting system\_other.img (66 MB) to disk… took 0.243s  
archive does not contain ‘system.sig’  
Sending ‘system\_a’ (2883584 KB) FAILED (remote: ‘Invalid size’)  
fastboot: error: Command failed  
Rebooting into bootloader OKAY [0.000s]

The sha256 checksum of the image zip is fine.  
I would appreciate it if somebody could help to resolve my issue.  
Thx

---

<div class="post-metadata">

**Author:** ![iodysseus](https://community.iode.tech/user_avatar/community.iode.tech/iodysseus/32/2488_2.png) [@iodysseus](https://community.iode.tech/u/iodysseus)\
**Post date:** [13 May 2023 15:15 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528/2 "2023-05-13T15:15:58Z")

</div>

Hello,  
make sure that the latest version of Google Pixel firmware Android 12.0.0 (SP1A.210812.016.C2, June 2022) is installed on your ‘blueline’ **before** installing iodéOS.

---

<div class="post-metadata">

**Author:** ![samsmi](https://community.iode.tech/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@samsmi](https://community.iode.tech/u/samsmi)\
**Post date:** [16 May 2023 07:51 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528/3 "2023-05-16T07:51:27Z")

</div>

Ok, maybe this info should be added to the installation guide - my device didn’t have the latest android firmware installed…now I have to search the www to get the Pixel working again - could have avoided that if the guide was clear about that.

---

<div class="post-metadata">

**Author:** ![samsmi](https://community.iode.tech/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@samsmi](https://community.iode.tech/u/samsmi)\
**Post date:** [17 May 2023 13:10 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528/4 "2023-05-17T13:10:29Z")

</div>

I was finally able to flash iode on the Pixel 3 - flashing failed not because the original android firmware wasn’t up to date (I had some android 8 installed). Within the unzipped \*blueline-fastboot.zip file there is a \*blueline-img.zip - after I also unzipped that archive, flashing the Pixel finally was successful - the installation guide doesn’t mention that - maybe usually not necessary but in my case this was needed.

---

<div class="post-metadata">

**Author:** ![AlphaElwedritsch](https://community.iode.tech/user_avatar/community.iode.tech/alphaelwedritsch/32/496_2.png) [@AlphaElwedritsch](https://community.iode.tech/u/AlphaElwedritsch)\
**Post date:** [17 May 2023 13:21 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528/5 "2023-05-17T13:21:15Z")

</div>

How did you flash?  
Via shell or batch script?

---

<div class="post-metadata">

**Author:** ![samsmi](https://community.iode.tech/letter_avatar_proxy/v4/letter/s/a9a28c/32.png) [@samsmi](https://community.iode.tech/u/samsmi)\
**Post date:** [17 May 2023 16:29 UTC](https://community.iode.tech/t/google-pixel-3-iode-3-6-flashing-fails/1528/6 "2023-05-17T16:29:27Z")

</div>

I sticked to the iode installation guide - I used the flash-all.sh script from the zip.
